Products

• High Performance Features:
  • DuPont’s PFA Teflon Lining Material
  • Polished Stainless Steel Body Materials (ANSI Flanged)
  • Nozzle Mounted or Pipeline 1” – 6” Size Range (ANSI 150# Flanged)
  • Completely Contained Sampling – No environmental or personnel exposure.
  • True Representative Sampling. Get inside your reactor or pipeline – safely!

Main Component Description:

• Process Glassware Borosilicate Glass ISO3585 (Process)
• Rotary Process Seal System: PTFE & Graphite Carbon
• Heating Bath & Volume: Polished Stainless Steel, 150L
• Evaporation Vessel Capacity: 6L - 100L Process Glass Vessel
• Heat Exchange & Surface area Process Glass, Up to 1.6m2
• Collecting Vessels: Process Glass Vessels from 2L-20L

Dimensions, Controls and Ratings:

• Evaporation Vessel Rotation Speed 15-100 rpm continuously controlled
• Nominal Dimensions (W x D x H) 2000mm x 840mm x 2400mm (Largest)
• Vacuum Capability: 5mmHg (Typical)
• Power Consumption: 6Kw (maximum)
• Electrical Power: 380V-60Hz (Other Voltages available)
• Temperature control system: Ambient to 150°C,with (±1°C accuracy)
• Electrical Classification: IP 55 or ATEX II 2 G b c IIB/IIA T3 or T4
• Data Interface: Via RS 232 Cable

Special Features:

• Optional Shielded Enclosure for complete personnel and process protection.
• Removable, Conical Stainless Steel heating bath for easy drainage and cleaning.
• User Friendly Programmable PLC Control – Pepperl + Fuchs
• Conical, Thermostatic Heating Bath Assembly features:
• Automatically controlled, hydraulic operating lifting system for fast start up, precise control and easy maintenance.
• Automatic Bath lowering system in case of power failure – for safety and protection of the evaporation vessel and process materials.
• All units built on casters for mobility

Continuously Measurement, Control and Visual Display of:

• Process Control (Standard “Cycle” Modes: 1, 2 or 3)
• Temperature (±1°C accuracy)
  • Bath Set Point and Actual Bath temperature
  • Process Vapor temperature Set Point
  • Actual Process Vapor temperature
• Vacuum
  • Vacuum Set Point and Actual Value
• Vessel Rotation Speed
  • Speed Set Point and Actual Rotation Speed

Reactor Type:
Process Borosilicate Glass Vessel with Glass Jacket
Available Size Range (standard “stock” offerings) 
5 to 100 liters 
Pressure and Temperature Ratings (Larger Diameter = Lower Pressure): 
Typical Vessel: 15 PSIG/Full Vacuum; -100 to 200°C 
Jacket: @ 8 PSIG; -100 to 200 °C 

Condenser:
Process Borosilicate Glass Unit (Glass Coil & Shell) 
Available Size Range 1. 5 to 80 sq. ft. single units, (stacking possible) 
Pressure and Temperature Ratings: 
Process Side: 15 PSIG/Full Vacuum; -100 to 200°C 
Coil: 40 PSIG; -100 to 200 °C 
Note: Minimum temperature limit depends on freezing point of material.

• World Product Range (WPR)

• New QVF End Shape - 9° Taper ½” – 6”  
• Molded Buttress Ends with Alignment Ring for ease of use.
  • 400°F up to 50psi depending on line size.
  • Plastic or Coated Metal Flanges

• KF Style (Schott Ball & Socket)

• Plain or Ball & Socket End Shapes - ½” – 2”
  • Traditional “Schott” End with “Flexibility at each Joint”
  • 400°F up to 50psi
  • Plastic Flanges
• KComplete Range of Pipe and Fittings as well as Gaskets and Adapters
  • Elbows
  • Tees
  • Reducers
  • Wide variety of Gasket forms and materials
  • Custom Fabrications to eliminate connections and hold up.

Stationary or Portable Vessels – Agitated, Receiver and Feed/Separations

• Cylindrical
  • 5 Liter – 400 Liter
  • Plain or Jacketed
• Spherical
  • 10 Liter – 300 Liter
  • Plain or Jacketed

Columns Packed, Distillation, Extraction

• 1”- 1 meter
• Various Packing Available
• Custom Components
  • Support Plates
  • Distribution/Feed

Heat Exchangers – All Glass, Glass Lined Steel or Hybrids (Combination units)

• Coil Type
  • 1 square ft – 120 Square ft Surface Area.
  • Glass, Hastelloy or Tantalum Coils
• Shell & Tube
  • 10 square ft – 500 Square ft Surface Area.
  • Components:
    • Glass or Exotic Alloy Tubes
    • Metal, Glass or Exotic Alloy Shell
    • Glass Filled TFE internals

• Custom
  • Fittings – Eliminate Connections/Joints
  • Vessels – Any size or Configuration
  • Pipe Lengths – Shorten or Lengthen
• Repair Cracked or Damaged
  • Vessels
  • Condensers
  • Glass Valves
• Adapters made from Exotic Alloys or PTFE
  • Adapt Equipment to:
    • Metal
    • Plastic
    • Pumps, Valves & Hoses

• Sentinel's Alloy Reactor Systems can be an ideal way to have high purity and pressure reactions.

• We Offer Systems Constructed:
  • Hastelloy
  • Tantalum
  • Stainless Steel
  •  
• High Pressure Reactions (up to 300psi)
• Mag Drive Agitator Seals
• ASME Code Jackets
  • Insulated with FoamGlas
  • Stainless Steel Sheathed for a GMP type appearance.