CLAMP FITTINGS

Clamp Style Fittings are most popular for easy assembly and breakdown of process lines and equipment. VNE offers Clamp Fittings in T304 and T316L materials in 1/2˝ through 12˝ sizes.

Gaskets for Clamp Fittings are available in several different materials, Buna-N, EPDM, Teflon®, and Viton®. Lightweight and heavy-duty clamps complete the unions. VNE’s Clamp Fittings meet all 3A requirements.

WELD FITTINGS

Weld Fittings are used on permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required. Weld Fittings are offered in nominal tube sizes 1/2˝ through 8˝ in T304 and T316L materials. Uniform wall thickness for 1/2˝ through 3˝ sizes measure .065 (16 ga). In 4˝ size, wall thickness measures .083 (14 ga), 6˝ and 8˝ .109 (12 ga).

VNE offers Polished ID and OD Fittings for immediate shipment. Other polished combinations may be ordered. Our Weld Fittings meet all 3A requirements.

BEVEL SEAT FITTINGS

Bevel Seat Fittings are used on process equipment and piping to ensure rigidity of the system. Bevel Seat Unions consist of a Threaded Bevel Ferrule mated with a Plain Bevel Ferrule. Both are offered in T304 and T316L material. Hex Union Nuts made of only T304 material are used to complete the union. Gaskets for VNE’s Bevel Seat Unions are not required for positive shut-off. However, gaskets may be purchased upon request. VNE’s Bevel Seat Fittings meet all 3A requirements and are available in 1˝ through 4˝ sizes.

E-LINE FITTINGS

E-Line Fittings have a male and female interface construction to ensure rigidity of your system. VNE offers E-Line Fittings in sizes 1˝ through 6˝ in T304 and T316L material.

VNE offers Polished ID and OD Fittings for immediate shipment. Other polished combinations may be ordered.

Gaskets for E-Line Fittings are available in several different materials, Buna-N, EPDM, Teflon®, and Viton®.

BIO - PHARM FITTINGS

VNE’s Bio - Pharm Fittings are fabricated in T316L Stainless Steel for superior corrosion resistance and low carbon precipitation of welds. Standard surface finish is 15 R.A. ID and 32 R.A. OD without electro polishing. Other surface finishes along with electro polishing are available upon request.